This is an old revision of the document!
<project_directory>/<project_name>.sdk/
In case you need it (but usually you shouldn't), default bitstream location is:
<project_directory>/<project_name>.runs/impl_1/
petalinux-create --type project --template zynq --name <boot_project_name> cd <boot_project_name>
petalinux-config --get-hw-description=<absolute_path_to_vivado_project_directory>/<project_name>.sdk/
Subsystem AUTO Hardware Settings -> Advanced bootable images storage Settings -> boot image settings : set ‘image storage media’ option to ‘primary sd’ -> kernel image settings: set ‘image storage media’ option to ‘primary sd’ -> dtb image settings : set ‘image storage media’ option to ‘primary sd’ Image Packaging Configurations: set ‘Root filesystem type’ option to ‘SD card’
Select Exit
and write the configuration.
In case you want to reconfigure boot settings, run:
petalinux-config
petalinux-config -c kernel
Hint: you can use vim-like search /<search_string>
to list all enabled drivers/modules.
For example, for axi_gpio
the following driver options should be enabled:
GPIO_SYSFS SYSFS GPIO_XILINX
If search result list is empty, the selected driver/module is not enabled.
default_bootcmd=run uenvboot; run cp_kernel2ram && bootm ${netstart}
is created by PetaLinux as
default_bootcmd=run uenvboot; run cp_kernel2ram && run cp_dtb2ram && booti ${netstart} - ${dtbnetstart}
with the typo in booti
instead of bootm
command.
To fix this bug, edit the platform-top.h
file (after all other configuration is done):
vim ./project-spec/meta-user/recipes-bsp/u-boot/files/platform-top.h
and add the following entry at the end:
/* Due to a bug where having u-boot load dtb from SD card causes the boot * command to default to using booti instead of bootm on Zynq, the defult build * fails to boot. This boot command override is a temporary workaround. */ #ifdef CONFIG_BOOTCOMMAND #undef CONFIG_BOOTCOMMAND #define CONFIG_BOOTCOMMAND "run uenvboot; run cp_kernel2ram && run cp_dtb2ram && bootm ${netstart} - ${dtbnetstart}" #endif
petalinux-build
–get-hw-description
): ls ./images/linux/*.bin
BOOT.BIN
image: petalinux-package --boot --format BIN --fsbl ./images/linux/zynq_fsbl.elf --fpga ./images/linux/<bit_filename>.bit --u-boot