lumiwiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== SD card setup ======

  * Use at least >=8 GB card
  * Install and lunch ''gparted'' (in Debian Stretch use ''sudo gparted'' instead of ''gprated-pkexec'')
  * Setup two partitions:
  - BOOT (64MB (512 MiB), FAT32, bootable flag) with 4MB empty space ahead
  - rootfs (rest, ext4)

{{:hw:zynq:linux:petalinux:sd_card.jpg?600|}}

  * Copy filesystems:
  - Mount the formatted card
  - Petalinux 2018.3: Copy boot and kernel: (for ''boot_project_name'' see [[hw:zynq:linux:petalinux:boot_kernel|Boot and Kernel configure &amp; build with PetaLinux without BSP (board support package)]]) <code>
cd <boot_project_path>/<boot_project_name>
sudo cp ./images/linux/BOOT.BIN ./images/linux/?mage* ./images/linux/?ystem.* ./images/linux/u-boot.bin ./images/linux/vmlinux <sd_card_mount_point>/BOOT/
sync

// old: sudo cp ./images/linux/* <sd_card_mount_point>/BOOT/
</code>
  - Petalinux 2020.2: Copy boot and kernel: (for ''boot_project_name'' see [[hw:zynq:linux:petalinux:boot_kernel|Boot and Kernel configure &amp; build with PetaLinux without BSP (board support package)]]) <code>
cd <boot_project_path>/<boot_project_name>
sudo cp ./images/linux/BOOT.BIN ./images/linux/?mage* ./images/linux/?ystem.* ./images/linux/u-boot.bin ./images/linux/vmlinux ./images/linux/boot.scr <sd_card_mount_point>/BOOT/
sync
</code>

  - Copy root filesystem: <code>
cd <rootfs_path>
sudo cp -a rootfs/* <sd_card_mount_point>/rootfs/
sync
</code>
  - Umount ''BOOT'' and ''rootfs''

lumiwiki

User Tools

Site Tools

Page Tools